Aktivität

von 18.10.2022 bis 16.11.2022

10:30 PhonyBL Feature #314: Use USB CDC connection for bootloader: Connection works.
Packet-Size in USB-Class fixed.
Update still does not work. Phony-BL get timeouts.
Maximilian Seesslen

12:53 PhonyBL Feature #314: Use USB CDC connection for bootloader: A copy from "lsusb -v" of an FTDI-adapter... Maximilian Seesslen
12:40 PhonyBL Feature #314 (Erledigt): Use USB CDC connection for bootloader: Not sure if it works out of the box with ttyACM; maybe the USB-code in biwak has to be changed to let the device appo... Maximilian Seesslen
12:39 PhonyBL Feature #310 (Erledigt): implement on candis: Done. Works nicely. Maximilian Seesslen
11:23 CANDis Feature #312 (Erledigt): Implement config Screen: Interface: USB/CAN
Screen-saver: ON/OFF
Default Screen: Main/Light/Timer

Stor... Maximilian Seesslen
11:14 CANDis Fehler #304 (Erledigt): USB terminal not working: Maximilian Seesslen
11:08 Biwak Feature #311 (Neu): Implement DMA USB: Would be nict to receive data from USB and store data to SPI flash at the same time. Maximilian Seesslen
11:05 Biwak Feature #309 (Erledigt): Implement USB-CDC (again): Done. Maximilian Seesslen

13:46 PhonyBL Feature #310 (Erledigt): implement on candis: Maximilian Seesslen

18:19 Biwak Feature #309: Implement USB-CDC (again): An bringup test is not needed; its an bringup test, not an biwak test. Maximilian Seesslen
18:13 Biwak Feature #309 (Erledigt): Implement USB-CDC (again): Maximilian Seesslen
17:52 libocelli Feature #238 (Erledigt): implement Navi-Screen: Maximilian Seesslen
17:34 Biwak Feature #308 (Erledigt): implement CHeartBeat: There is the "trouble" function implemented for sensemux.
It should be integrated to an heartbeat class.
* good (... Maximilian Seesslen

13:34 libocelli Feature #305 (Erledigt): ImgCat: Image cataloge format for SPI-Flash.
Type:
* Splash
* Photo
* Icon
* End
* Font
Format:
* Raw RGBA
* Raw... Maximilian Seesslen
10:58 CANDis Fehler #304 (Erledigt): USB terminal not working: maybe its just in HID-Mode Maximilian Seesslen

10:00 libcampo Feature #302 (Abgewiesen): campo.sh: writeHwInfo: support multiple layout versions: Split converting functions to own file and have different functions.
The "campo.sh" file needs to contain variable... Maximilian Seesslen

14:39 Biwak Feature #301 (Erledigt): Get rid of strange timer calculations: prescaler=( cpu / target / 65536 ) + 1;
period=( cpu / target / prescaler );

e.g.
prescaler = i... Maximilian Seesslen

15:02 Minutnik eInk Fehler #298 (Erledigt): Temperature-Sensor, Flash etc are permanently on VDD: There is already an switch for Display.
Temperature-sensor and FLASH can be connected to this power source.
Need ... Maximilian Seesslen

22:17 Minutnik eInk Fehler #288: Device No.2 freezes when connected to USB: Could reproduce it also with serno.1.
The disturbtion on VDD is quite high when USB is connected (ca. 24ns breakdown... Maximilian Seesslen
14:42 Minutnik eInk Fehler #279: ADC breaks after buzzer alarm: This can be added to bringup tests. Maximilian Seesslen
14:39 Minutnik eInk Feature #293 (Erledigt): Bringup: add calibration measurement functions: Device should be able to calibrate itself and store the values in eeprom.
Maximilian Seesslen
14:35 Minutnik eInk Unterstützung #292 (Erledigt): Power injection pins 3V missing: One additional testpoint for 3V would help to measure power consumtion of MCU side.
Maximilian Seesslen

14:45 Minutnik eInk Fehler #288: Device No.2 freezes when connected to USB: Is USB power to low?
Maximilian Seesslen
14:40 Minutnik eInk Fehler #291 (Erledigt): ADC Spannungsteiler ist permanent: Route the ground to an GPIO so it can be disabled and will be disabled when powered off.
Or even use an NMOS.
I m... Maximilian Seesslen
14:38 Minutnik eInk Fehler #290 (Neu): Yellow and red LEDs are quite dark: This is only noticable with lighttramitters which blocks/diffuse some light.
Maximilian Seesslen

11:03 Minutnik eInk Fehler #288 (Erledigt): Device No.2 freezes when connected to USB: Device No.1 can not reproduce this.
Maybe Brownout-detection fails. Check other groups.
OB_BOR_LEVEL3: Supp... Maximilian Seesslen
10:57 Minutnik eInk Fehler #286 (Abgewiesen): ADC breaks after buzzer alarm: Duplicate Maximilian Seesslen

Auch abrufbar als: Atom

Redmine