Aktivität

Aktivität von Maximilian Seesslen

von 10.01.2024 bis 08.02.2024

18:37 Mainswitch Requirement #482 (Erledigt): Pseudo-Off: Due to non-functional WKUP, the first boards should not got to standby because
they can not be woken up any more.
... Maximilian Seesslen
18:07 Campo Wiki-Bearbeitung: TDT-Protocol_on_CAN (#101): Maximilian Seesslen
18:01 Mainswitch Requirement #481 (Erledigt): Send Event-error when battery is too low: Target voltage is 2,4V.
Check should be done every 15min.
Error should be send at 2,2V (end-point voltage of NiMH i... Maximilian Seesslen
17:48 Mainswitch Requirement #480 (Erledigt): Configurable auto-off timeout: After an configurable ammount of time, the device should automatically turn off.
The 'off' is an hard power-off. O... Maximilian Seesslen
17:29 Mainswitch Feature #479 (Erledigt): Check behaviour when device is immediately shut off before button release: I assumed that the device will immediately repower on when shutting down while button is still pressed.
Has to be ve... Maximilian Seesslen
17:27 Mainswitch Requirement #478 (Erledigt): LED States: * The LED is permanent on in operational mode
* The LED is blinking normal when shutdown was initiated by holding bu... Maximilian Seesslen
17:16 Mainswitch Wiki-Bearbeitung: Wiki (#1): Maximilian Seesslen

18:26 Campo Wiki-Bearbeitung: TDT-Protocol_on_CAN (#100): Maximilian Seesslen
16:56 Hardware Wiki-Bearbeitung: Debug-Interface (#3): Maximilian Seesslen
15:50 CANBuz Wiki-Bearbeitung: Jobs (#4): Maximilian Seesslen
15:36 CANBuz Wiki-Bearbeitung: Jobs (#3): Maximilian Seesslen

17:47 campoTemplate Fehler #474 (Neu): Git history is not reset: Its confusing to have already taged versions.
Maximilian Seesslen
15:21 campoTemplate Fehler #473 (Neu): There is no actual template for README.md: The README.md is about "campoTemplate" itself. Not very problematic because the templates
README would be quite empt... Maximilian Seesslen

14:40 mainSwitch Fehler #472 (Abgewiesen): Wakeup-Button is not working: In normal operation this is no issue because its an normyl power cycle.
But when the device is still powered by anot... Maximilian Seesslen
13:29 mainSwitch Fehler #471: Wakeup-Button is not working: PB1 is no WKUP at all!
Others WKUP-pins in the arena file have to be checked. Maximilian Seesslen
13:25 mainSwitch Fehler #471 (Neu): Wakeup-Button is not working: In normal operation this is no issue because its an normal power cycle.
But when the device is still powered by anot... Maximilian Seesslen

17:43 Kokon Wiki-Bearbeitung: Eval (#4): Maximilian Seesslen
15:30 Kokon Wiki-Bearbeitung: Eval (#3): Maximilian Seesslen
14:53 Kokon Wiki-Bearbeitung: Eval (#2): Maximilian Seesslen
14:33 Kokon Wiki-Bearbeitung: Eval (#1): Maximilian Seesslen
14:26 Kokon Wiki-Bearbeitung: Wiki (#1): Maximilian Seesslen
13:27 Biwak Feature #470 (Erledigt): cmake function to select bootloader or application with bootloader: ... Maximilian Seesslen
10:37 mainSwitch Wiki-Bearbeitung: V020 (#1): Maximilian Seesslen
10:20 mainSwitch Wiki-Bearbeitung: Wiki (#4): Maximilian Seesslen
10:10 mainSwitch Wiki-Bearbeitung: V100 (#1): Maximilian Seesslen

11:51 Biwak Feature #466 (Erledigt): avoiding HAL_RCC_OscConfig does not work: Maximilian Seesslen
11:51 Biwak Feature #466 (Gelöst): avoiding HAL_RCC_OscConfig does not work: Maximilian Seesslen

13:25 Biwak Feature #466 (Erledigt): avoiding HAL_RCC_OscConfig does not work: objdump mainswitch -t | grep HAL
shows that the symbol is local (and additional global if forced).
Web tells that... Maximilian Seesslen
10:20 Campo Wiki-Bearbeitung: Firmware_sizes (#5): Maximilian Seesslen

Auch abrufbar als: Atom