Aktivität

von 18.01.2024 bis 16.02.2024

18:37 Mainswitch Requirement #482 (Erledigt): Pseudo-Off: Due to non-functional WKUP, the first boards should not got to standby because
they can not be woken up any more.
... Maximilian Seesslen
18:01 Mainswitch Requirement #481 (Erledigt): Send Event-error when battery is too low: Target voltage is 2,4V.
Check should be done every 15min.
Error should be send at 2,2V (end-point voltage of NiMH i... Maximilian Seesslen
17:48 Mainswitch Requirement #480 (Erledigt): Configurable auto-off timeout: After an configurable ammount of time, the device should automatically turn off.
The 'off' is an hard power-off. O... Maximilian Seesslen
17:29 Mainswitch Feature #479 (Erledigt): Check behaviour when device is immediately shut off before button release: I assumed that the device will immediately repower on when shutting down while button is still pressed.
Has to be ve... Maximilian Seesslen
17:27 Mainswitch Requirement #478 (Erledigt): LED States: * The LED is permanent on in operational mode
* The LED is blinking normal when shutdown was initiated by holding bu... Maximilian Seesslen

21:38 Biwak Revision 09d79e9e (libbiwak3): added events header: Redmine Admin
21:35 Biwak Revision 51a99b70 (libbiwak3): downsize: Redmine Admin
21:34 Biwak Revision 6032b8c8 (libbiwak3): support for bootloader on cortex-m0: Redmine Admin
21:34 Biwak Revision 8b1766f3 (libbiwak3): heartbeat: moved events to logging: Redmine Admin

12:51 Biwak Revision dd054097 (libbiwak3): fixed abort() and __aeabi_atexit(): Redmine Admin
12:17 Biwak Revision ff6d3f7c (libbiwak3): fixed merge conflict: Redmine Admin
12:03 Biwak Revision 47c89014 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
11:59 Biwak Revision d260622f (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
11:43 Biwak Revision 6f1ca9f4 (libbiwak3): Skip some initializations on applications started by custom bootloader: Redmine Admin
11:39 Biwak Revision 60d1d25a (libbiwak3): __aeabi_atexit: fixed parameters: Redmine Admin
11:25 Biwak Revision b519e03d (libbiwak3): log: draft for support for LEPTO_LOG_SILENT: Redmine Admin
11:25 Biwak Revision 1fd9bee4 (libbiwak3): retain: fixed support for BIWAK_I2C_RETAIN_ONLY: Redmine Admin
11:24 Biwak Revision 8074b78a (libbiwak3): can: re-added missing config structure: Redmine Admin
11:23 Biwak Revision 6b613e47 (libbiwak3): output: cleanup: Redmine Admin
11:22 Biwak Revision 1dc78512 (libbiwak3): input: make usage of signals configurable: Redmine Admin
11:21 Biwak Revision 188522c9 (libbiwak3): flash: use attribute instead of virtual functions for page sizes: Redmine Admin
11:16 Biwak Revision 087ad682 (libbiwak3): adc: use curly brace initializer for HAL struct: Redmine Admin

17:47 campoTemplate Fehler #474 (Neu): Git history is not reset: Its confusing to have already taged versions.
Maximilian Seesslen
15:21 campoTemplate Fehler #473 (Neu): There is no actual template for README.md: The README.md is about "campoTemplate" itself. Not very problematic because the templates
README would be quite empt... Maximilian Seesslen

14:40 mainSwitch Fehler #472 (Abgewiesen): Wakeup-Button is not working: In normal operation this is no issue because its an normyl power cycle.
But when the device is still powered by anot... Maximilian Seesslen
13:29 mainSwitch Fehler #471: Wakeup-Button is not working: PB1 is no WKUP at all!
Others WKUP-pins in the arena file have to be checked. Maximilian Seesslen
13:25 mainSwitch Fehler #471 (Neu): Wakeup-Button is not working: In normal operation this is no issue because its an normal power cycle.
But when the device is still powered by anot... Maximilian Seesslen

Auch abrufbar als: Atom

Redmine