Redmine

01.02.2025

15:48 Kokon Fehler #607 (Erledigt): Check moveInterrupVectorTable; still using hardcoded 0xC0 entries?

Maximilian Seesslen

31.01.2025

16:32 libtdt Feature #609 (Erledigt): parse log codes from repo

Would be cool to print nice messages in the diagnose widget of cordyceps.
Libtdt should not know about all the error... Maximilian Seesslen

29.01.2025

15:01 Mainswitch Feature #608 (Neu): Shutdown command

CANDis should have some button to shutdown mainswitch.
There will be a flash.
So it has to be a multicast shutdown-... Maximilian Seesslen

14:50 Mainswitch Fehler #606 (Erledigt): Mainswitch bootloader does not fit into flash using TCB 1.6.7

Maximilian Seesslen

27.01.2025

14:05 Kokon Fehler #607 (Erledigt): Check moveInterrupVectorTable; still using hardcoded 0xC0 entries?

Would be bad. Maximilian Seesslen

13:29 Mainswitch Fehler #606 (Erledigt): Mainswitch bootloader does not fit into flash using TCB 1.6.7

12 Bytes missing ;)
Hopefully some periphery can be removed from bootloader via "variant" feature.
Maximilian Seesslen

13:03 Campo Feature #589 (Abgewiesen): Add script to find devices with obsolete firmware

I'm happy when flashing is working. Maximilian Seesslen

11:07 Campo Feature #598 (Erledigt): CS2025.01

Maximilian Seesslen

11:06 Cordyceps Feature #518 (Erledigt): Implement message server/client architecture

Maximilian Seesslen

11:04 Cordyceps Feature #520 (Erledigt): Implement canserver/CAN-Gateway

Maximilian Seesslen

11:04 Cordyceps Feature #604 (Abgewiesen): Flash firmware automatically

I'm happy when the scripts work. Maximilian Seesslen

26.01.2025

17:45 Kokon Feature #597 (Erledigt): Support second bootloader for flashing first bootloader

Implemented. Maximilian Seesslen

17:44 libtdt Fehler #605 (Erledigt): MMP communication with >2 nodes

It was an STM32F103 with not very precise internal OSC. Maximilian Seesslen

17:43 Biwak Feature #572 (Erledigt): Linker script: add ram area for vector table

Maximilian Seesslen

17:42 Biwak Fehler #596 (Abgewiesen): Device freezes on high CAN traffic

Not valid any more. Maximilian Seesslen

17:41 sensemux Fehler #601 (Erledigt): Sensemux does not operate CAN properly

HSI was not exact enough. Changing HSI calibration helped. Maximilian Seesslen

24.01.2025

11:35 libtdt Fehler #605 (Erledigt): MMP communication with >2 nodes

Klappt einfach nicht.
Ein nicht-toleranter Modus sollte implementiert werden der bei PProblemen sofort abbricht und ... Maximilian Seesslen

23.01.2025

16:17 Cordyceps Feature #604 (Abgewiesen): Flash firmware automatically

Not sure if this is usable.
Maximilian Seesslen

22.01.2025

14:53 Cordyceps Feature #599 (Erledigt): Sort nodes in node view

Maximilian Seesslen

10:49 libcampo Feature #603 (Neu): Vagus: CAN: use filters

When flashing firmware to a device, everything gets quite busy.
This can be avoided by using filters.
* Allow all m... Maximilian Seesslen

09:34 sensemux Fehler #601: Sensemux does not operate CAN properly

Transceiver OK, traffic test ok (ignore error on start).
When scanning bus, some messages get lost.
Implement (opti... Maximilian Seesslen

21.01.2025

16:04 CANSwitch Feature #498 (Abgewiesen): Write testing framework based on events for host PC

Testing software on PC directly is much nicer.
Maximilian Seesslen

15:54 CANSwitch Test #487 (Erledigt): Fading working

Maximilian Seesslen

15:53 CANSwitch Feature #562 (Erledigt): Binary size to big

Works well at the moment. Maximilian Seesslen

15:51 CANSwitch Fehler #602 (Erledigt): Media is not switched off

Is the fader active, so with delay of 20 Seconds?
Maximilian Seesslen

15:50 CANSwitch Test #485 (Erledigt): Timeout

Maximilian Seesslen

13:23 sensemux Fehler #601 (Erledigt): Sensemux does not operate CAN properly

[[http://www.bittiming.can-wiki.info/]]
| Bit Rate | accuracy | Prescaler | Number of quante | Seg1 (Prop_Seg+Phas... Maximilian Seesslen

17.01.2025

13:29 Cordyceps Feature #599 (Erledigt): Sort nodes in node view

The objects of nodes are already sorted.
When the nodes are also sorted, the nodes will always be at the same positi... Maximilian Seesslen

16.01.2025

18:44 Campo Feature #598 (Erledigt): CS2025.01

Maximilian Seesslen

18:26 Kokon Feature #597 (In Bearbeitung): Support second bootloader for flashing first bootloader

Maximilian Seesslen

18:16 Kokon Feature #597 (Erledigt): Support second bootloader for flashing first bootloader

Would be nice to be able to flash bootloader. For this a second bootloader has to be flashed at the application area.... Maximilian Seesslen

17:56 Biwak Fehler #596 (Abgewiesen): Device freezes on high CAN traffic

When flashing (other) device, mainswitch freezes.
Sending an error is problematic.
Send error only on error-transit... Maximilian Seesslen

15.01.2025

15:12 Kokon Feature #595 (Neu): Check board id and revision before flashing

This can be checked in flasher tool or on the devcice.
Where to keept the information for firmware files.
Database ... Maximilian Seesslen

11:05 Cordyceps Fehler #592 (Erledigt): Dont show MMP messages in nodes tree

Maximilian Seesslen

13.01.2025

15:38 libcampo Feature #593 (Neu): hwdata: clean up

Clean up the code a bit.
An seperate application should be created for dumping, generating eeprom content, transfe... Maximilian Seesslen

14:33 Cordyceps Fehler #592 (Erledigt): Dont show MMP messages in nodes tree

Its interpreted as regular TDT object. Maximilian Seesslen

12.01.2025

16:26 libcampo Feature #588 (Erledigt): hwDataGen

Maximilian Seesslen

09.01.2025

16:06 theme_noto Feature #566: create const icon references

Looks like there is something implemented. But documentation about generated header is completely missing.
Maximilian Seesslen

08.01.2025

11:20 Biwak Fehler #590 (Erledigt): lrElapsed does not work any more

Test is added.
Problem was in Mainswitch. After a Software-Shutdown the shutdown-message was spamed when power was... Maximilian Seesslen

07.01.2025

18:31 Biwak Feature #591 (Neu): move timing functions to systimer.cpp

Make it clean. "usleep()" is in no way related to CTimer. Maximilian Seesslen

16:28 Biwak Fehler #590: lrElapsed does not work any more

This can be a unit test for host.... Maximilian Seesslen

14:32 Biwak Fehler #590 (Erledigt): lrElapsed does not work any more

It waits for the first elapse event and then returns true forever.
Looks like timer-value is not updated.
Very ba... Maximilian Seesslen

15:09 Kokon Feature #585 (Erledigt): Implement scanning nodes and switching run mode

Maximilian Seesslen

14:27 Biwak Feature #470 (Erledigt): cmake function to select bootloader or application with bootloader

Maximilian Seesslen

14:13 Campo Feature #589 (Abgewiesen): Add script to find devices with obsolete firmware

Put logic for SQLite database to CANFlasher/kokon is bad.
Generate parsable version output to CANFlasher tool would ... Maximilian Seesslen

12:19 libcampo Feature #588 (Erledigt): hwDataGen

Create generator tool.
The scipts are nice but confusing.
Maximilian Seesslen

12:11 libcampo Feature #491 (Erledigt): Vagus: implement command to switch to bootloader

Maximilian Seesslen

12:10 libcampo Feature #457 (Erledigt): Track library release sizes

Maximilian Seesslen

12:01 Campo Feature #500 (Erledigt): reactivate qt integration

Maximilian Seesslen

11:59 Cordyceps Feature #520 (In Bearbeitung): Implement canserver/CAN-Gateway

Maximilian Seesslen

11:58 Cordyceps Feature #520 (Erledigt): Implement canserver/CAN-Gateway

CANHub is created, should be used by cordyceps. Maximilian Seesslen

05.01.2025

08:01 Biwak Revision 7d225b27 (libbiwak3): fixed building for host

Redmine Admin

07:49 Biwak Revision 78dd256b (libbiwak3): draft

Redmine Admin

07:37 Biwak Revision a8cf4469 (libbiwak3): fixed building for host

Redmine Admin

07:32 Biwak Revision 4e83100c (libbiwak3): fixed compiling for host

Redmine Admin

07:14 Biwak Revision 568ca0ca (libbiwak3): flash: optional 32bit write access

Redmine Admin