Software » Campo » Biwak

Heute

16:07 Fehler #696 (Neu): Touch: Whole processing is done in ISR

In theory the application could be accessing EEPROM and user can press touch.
The I2C periphery would then get recon... Maximilian Seesslen

13:56 Feature #671 (To be verified): Implement dynamic sleep

Maximilian Seesslen

13:56 Feature #671 (In Bearbeitung): Implement dynamic sleep

Maximilian Seesslen

13:56 Feature #695 (Neu): Verify dynamic sleep

Dynamic sleep in CONFIG_BIWAK_DATA_EVENT is nice.
Fine-Adjusting may be needed or at least verified.... Maximilian Seesslen

13:16 Feature #692 (To be verified): CRC: Make methods const.

Maximilian Seesslen

13:16 Feature #692 (In Bearbeitung): CRC: Make methods const.

Maximilian Seesslen

13:00 Fehler #688 (To be verified): Host GUI: Pressing button does not result in interrupt

Unit test is created. Maximilian Seesslen

13:00 Fehler #688 (In Bearbeitung): Host GUI: Pressing button does not result in interrupt

Provide some examples. The examples should work for Qt and Nucleo-F303K8.
Maximilian Seesslen

09:52 Feature #690 (To be verified): Retain: Use bigger data type than 8bit for counter

Maximilian Seesslen

09:52 Feature #690 (In Bearbeitung): Retain: Use bigger data type than 8bit for counter

Maximilian Seesslen

24.09.2025

17:18 Feature #689 (To be verified): Allow more retain containers than two

Maximilian Seesslen

17:18 Feature #689 (In Bearbeitung): Allow more retain containers than two

Maximilian Seesslen

11:37 Feature #692 (To be verified): CRC: Make methods const.

diff --git a/include/biwak/crc.hpp b/include/biwak/crc.hpp
index b6a451f2..db16b3e5 100644
--- a/include/biwak/crc.... Maximilian Seesslen

19.09.2025

19:48 Feature #690 (To be verified): Retain: Use bigger data type than 8bit for counter

512 erase blocks of NOR can not be handled. At least 16bit needed. Maximilian Seesslen

19:41 Feature #689 (To be verified): Allow more retain containers than two

CANRec need this feature. Maximilian Seesslen

17.09.2025

14:39 Feature #628 (To be verified): use 128 bit UID

Maximilian Seesslen

14:39 Feature #628 (In Bearbeitung): use 128 bit UID

Maximilian Seesslen

11:10 Feature #687 (To be verified): Blink modes: Use slower timings for host

Maximilian Seesslen

11:10 Feature #687 (In Bearbeitung): Blink modes: Use slower timings for host

Maximilian Seesslen

10:43 Fehler #688 (To be verified): Host GUI: Pressing button does not result in interrupt

Qt signal/slot should be used to match behaviour on MCU. Maximilian Seesslen

16.09.2025

22:02 Feature #687 (To be verified): Blink modes: Use slower timings for host

On a GUI the usually fast flashing of an LED can not always be seen on Widgets. Blinking has to be slowered down.
... Maximilian Seesslen

20:30 Feature #686 (Erledigt): Retain: Don't store flash address for each container

Maximilian Seesslen

17:36 Feature #686 (Erledigt): Retain: Don't store flash address for each container

Its ok to store it when there are only 2 containers. But CANRec will use the mechanism for a whole NOR chip.
Its not... Maximilian Seesslen

05.09.2025

13:50 Feature #628: use 128 bit UID

Saved 36 Bytes :(. At least much cleaner code. Maximilian Seesslen

29.08.2025

13:41 Feature #591 (Erledigt): move timing functions to systimer.cpp

Maximilian Seesslen

13:39 Feature #575 (Abgewiesen): Implement function to configure OSC with HSI only

LTO shrinks it anyways. Maximilian Seesslen

13:38 Fehler #647 (Erledigt): Dodgy RTC

Maximilian Seesslen

13:03 Feature #671 (To be verified): Implement dynamic sleep

The lrElapsed function can detect which is the smalest timespan till something wants to react.
In usleepNoData() thi... Maximilian Seesslen