Software » Campo » Biwak

07.07.2026

17:16 Feature #817 (Neu): CAN: Add an more complete calculation for timing again

Just for testing:... Maximilian Seesslen

04.07.2026

15:33 Fehler #815 (Erledigt): CANDis: Reset does not work when STLink/Debugger is connected

It was a too ghigh pulldown (1 Mega Ohm) resistor on BOOT0. Has to be resoldered on NUC64Debug Maximilian Seesslen

02.07.2026

12:57 Fehler #815: CANDis: Reset does not work when STLink/Debugger is connected

DBGMCU->CR = 0; // Debug-Freeze deaktivieren
__DSB();
__ISB();
NVIC_SystemReset();
.cfg:
transport select hl... Maximilian Seesslen

12:56 Fehler #815 (Erledigt): CANDis: Reset does not work when STLink/Debugger is connected

Maximilian Seesslen