Hardware

h1. HWData

h2. Intro

Campo specifies layouts for hardware data and configuration.

"Campo":http://hase.seesslen.net/redmine/projects/campo/wiki/HwData_Structures

"Miniminutnik":http://hase.seesslen.net/redmine/projects/miniminutnik_sw/wiki/EEPROM

* 0x20 Bytes Production-Data (common)

* 0x20 Bytes Board-Config (specific)

* 0x20 Bytes Application configuration (specific, redundant)

This production data should neither be store in hw- nor sw-repository.

An products-global database may irritate, having all boards in one table with same serial number.

An per-project-database should be created.

-The ".campo" has to contain an function to migrate hw-config information from the database to the c-structure for gdb.-

-In the production repository there is can script which calls the campo script in the software repository.-

The production repository holds the bringup binaries and an own ".campo" which contain an function to

migrate hw-config information from the database to the c-structure for gdb.

h2. Where to store production database

* Production-Repository in HW for all products

* One database for all? There is specific configuration data.

** Abstract specific configuration as option bytes?

** Make it generic; MCU; solder option; Counter; 

** Show info from board-table

* Run script in SW-Repo to write hwdata (There is already the bringup software. But repo should not change by produced PCBs)