Eval » Historie » Version 5
Maximilian Seesslen, 29.03.2022 15:51
| 1 | 1 | Maximilian Seesslen | h1. Eval |
|---|---|---|---|
| 2 | |||
| 3 | * Pressing On-button must switch 240V line |
||
| 4 | |||
| 5 | ** Battery driven? |
||
| 6 | *** Will there be an plumbum battery or only regular powersupply |
||
| 7 | ** A simple 1,5V Alkali will do. |
||
| 8 | ** -Button can handle 240V- |
||
| 9 | 2 | Maximilian Seesslen | ** An 18650 is perfect. Along with the MCP73871 or only MAX1811ESA+. No integrated LDO necessary, only SSR is switched. AUR9811DGD only 33 Cents. |
| 10 | 4 | Maximilian Seesslen | ** An 18650 is way too big. We only flash the LED for a short time. Ne Knopfzelle wuerde es tun. |
| 11 | 1 | Maximilian Seesslen | |
| 12 | * Single-Button can be realised by bringing signal to mosfet along with diodes |
||
| 13 | * Simple STM32F042 can be used |
||
| 14 | * Mini-USB connector for direct charge. |
||
| 15 | 5 | Maximilian Seesslen | * 5V AC/DC Wandler integrieren; 5W, >80% efficienty; Keine Schnelladestation, nur effiziente powerline. |
| 16 | 3 | Maximilian Seesslen | * Strom messen; STM32-32K-Variante sinnvoll; sinnvoller wie Akku messen der eh bestromt wird wenn geraet eingeschalten ist. |
| 17 | ** Liegt altes Design noch wo rum? |
||
| 18 | 5 | Maximilian Seesslen | * USB A Buchsen; 1 Stueck on Board, Terminal fuer weitere 4 via Kabel |
| 19 | 4 | Maximilian Seesslen | * Timeout |
| 20 | 5 | Maximilian Seesslen | ** Buzzer fuer intervention, startup, shutdown. Hab ja noch genug rumflitzen. |