Projekt

Allgemein

Profil

Wiki » Historie » Revision 10

Revision 9 (Maximilian Seesslen, 16.11.2026 15:20) → Revision 10/11 (Maximilian Seesslen, 17.11.2026 13:04)

h1. Wiki

* 2 x CAN
* 2 x UART
* Connect DAC to ADC.
* 2 further ADC inputs with different resistor dividers.
* Can even test debouncing; PWM to GPIO Input
* Test slope counter, Hz etc.
* Program internal flash
* Verify CRC calculation
* Any present SPI flash
* Any present I2C flash
* Compare systimer with RTC
* Test some patterns in UID
* UCPD test platform
* ADC fuer USBCPD
* HSE 8Mhz for USB
* Event-loop LED
* USB to I2C adapter
* VBUS sense; 100K/100K divider
* RTC output to input

Cheapest would be:

* STM32G0B1CBU6; UFQFPN48; 128 Kbytes flash; 2048 erase page
* USBLC6-2SC6
* USB 22 Ohm in reihe
* CC1/CC2 5K1 Ohm gegen GND

Connections:

* Debug
* USB-C; FRSTX, CC1, CC2 (Fast Role Swap Transmit)
* PWM-LED + 5V output like CANIO
* I2C like CANIO
* SPI like CANIO
*
CAN-Bus x 2, via solder-bridges
* 3V power output to supply test ICs

Other usefull function?

* CANIO as super big; RGB-LED controller
* PEAK Klon / USB-CAN Adapter
* 1,8V; Transceiver benoetigen 2V signale
* IR-Input: Switch light by IR-Controller