Steps » Historie » Version 6
Maximilian Seesslen, 18.07.2025 13:44
| 1 | 1 | Maximilian Seesslen | h1. Steps |
|---|---|---|---|
| 2 | |||
| 3 | 2 | Maximilian Seesslen | * -Design Eval PCB- |
| 4 | 4 | Maximilian Seesslen | * -Order STM32F072- |
| 5 | 1 | Maximilian Seesslen | * Solder EVAL PCB |
| 6 | 4 | Maximilian Seesslen | * LED-Leiste |
| 7 | 5 | Maximilian Seesslen | * Order pin header for LED drivers; "DIgikey":https://www.digikey.de/de/products/filter/rechteckige-steckverbinder/steckleisten-steckbuchsen-sockel/315?s=N4IgjCBcoGwJxVAYygMwIYBsDOBTANCAPZQDaIALAAxwDMdIAuoQA4AuUIAymwE4CWAOwDmIAL6EwAdjhVEIFJAw4CxMiDhSATDCasOkbnyGiJILdK3zFyvIRKRyEZiHacAcgFcAtrgEoxQKA |
| 8 | 6 | Maximilian Seesslen | ** 4: 732-61000411921-ND |
| 9 | 3 | Maximilian Seesslen | * Produce firmware/Setup to wake STM32 up. An additional PCB may be needed with switch and LED. Without an PCB just an LED can be driven. |
| 10 | * min Drop-out in buck-mode of LED drivers not known. Measure Voltage with existing modules. |
||
| 11 | * Design real PCB |