Aktivität
von 15.01.2024 bis 13.02.2024
11.02.2024
-
15:30 Biwak Revision 41f1b1d1 (libbiwak3): draft
-
09:04 CANSwitch Test #489 (Neu): Send keep-alive
- When changing illumination, an keep-alive event should be send.
-
08:51 CANSwitch Test #488 (Neu): Fading out before timeout
-
08:50 CANSwitch Test #487 (Erledigt): Fading working
-
07:43 CANSwitch Test #486 (In Bearbeitung): timeout warning
-
07:43 CANSwitch Test #486 (Erledigt): timeout warning
-
07:42 CANSwitch Test #486 (In Bearbeitung): timeout warning
-
07:43 CANSwitch Test #485 (In Bearbeitung): Timeout
-
07:43 CANSwitch Test #485 (Erledigt): Timeout
-
07:40 CANSwitch Test #485 (Erledigt): Timeout
06.02.2024
-
20:27 Biwak Revision d5c3a345 (libbiwak3): fixed typo
05.02.2024
-
22:56 Mainswitch Feature #347 (Erledigt): Send battery level via CAN
-
22:54 Mainswitch Feature #479 (Erledigt): Check behaviour when device is immediately shut off before button release
-
22:51 Mainswitch Requirement #478 (Erledigt): LED States
-
22:51 Mainswitch Requirement #481 (Erledigt): Send Event-error when battery is too low
-
22:11 Mainswitch Requirement #480 (Erledigt): Configurable auto-off timeout
-
22:02 Mainswitch Requirement #482 (Erledigt): Pseudo-Off
-
22:02 Mainswitch Requirement #483 (Erledigt): Wait for button-release on shutdown
-
21:51 Mainswitch Requirement #483 (Erledigt): Wait for button-release on shutdown
- When shutdown via button is triggered, a state has to wait untill the button is released.
Otherwise the device would...
01.02.2024
-
18:37 Mainswitch Requirement #482 (Erledigt): Pseudo-Off
- Due to non-functional WKUP, the first boards should not got to standby because
they can not be woken up any more.
... -
18:01 Mainswitch Requirement #481 (Erledigt): Send Event-error when battery is too low
- Target voltage is 2,4V.
Check should be done every 15min.
Error should be send at 2,2V (end-point voltage of NiMH i... -
17:48 Mainswitch Requirement #480 (Erledigt): Configurable auto-off timeout
- After an configurable ammount of time, the device should automatically turn off.
The 'off' is an hard power-off. O... -
17:29 Mainswitch Feature #479 (Erledigt): Check behaviour when device is immediately shut off before button release
- I assumed that the device will immediately repower on when shutting down while button is still pressed.
Has to be ve... -
17:27 Mainswitch Requirement #478 (Erledigt): LED States
- * The LED is permanent on in operational mode
* The LED is blinking normal when shutdown was initiated by holding bu...
31.01.2024
-
21:38 Biwak Revision 09d79e9e (libbiwak3): added events header
-
21:35 Biwak Revision 51a99b70 (libbiwak3): downsize
-
21:34 Biwak Revision 6032b8c8 (libbiwak3): support for bootloader on cortex-m0
-
21:34 Biwak Revision 8b1766f3 (libbiwak3): heartbeat: moved events to logging
20.01.2024
-
12:51 Biwak Revision dd054097 (libbiwak3): fixed abort() and __aeabi_atexit()
-
12:17 Biwak Revision ff6d3f7c (libbiwak3): fixed merge conflict
-
12:03 Biwak Revision 47c89014 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel
-
11:59 Biwak Revision d260622f (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel
-
11:43 Biwak Revision 6f1ca9f4 (libbiwak3): Skip some initializations on applications started by custom bootloader
-
11:39 Biwak Revision 60d1d25a (libbiwak3): __aeabi_atexit: fixed parameters
-
11:25 Biwak Revision b519e03d (libbiwak3): log: draft for support for LEPTO_LOG_SILENT
-
11:25 Biwak Revision 1fd9bee4 (libbiwak3): retain: fixed support for BIWAK_I2C_RETAIN_ONLY
-
11:24 Biwak Revision 8074b78a (libbiwak3): can: re-added missing config structure
-
11:23 Biwak Revision 6b613e47 (libbiwak3): output: cleanup
-
11:22 Biwak Revision 1dc78512 (libbiwak3): input: make usage of signals configurable
-
11:21 Biwak Revision 188522c9 (libbiwak3): flash: use attribute instead of virtual functions for page sizes
-
11:16 Biwak Revision 087ad682 (libbiwak3): adc: use curly brace initializer for HAL struct
19.01.2024
-
17:47 campoTemplate Fehler #474 (Neu): Git history is not reset
- Its confusing to have already taged versions.
-
15:21 campoTemplate Fehler #473 (Neu): There is no actual template for README.md
- The README.md is about "campoTemplate" itself. Not very problematic because the templates
README would be quite empt...
17.01.2024
-
13:27 Biwak Feature #470 (Erledigt): cmake function to select bootloader or application with bootloader
- ...
16.01.2024
-
11:51 Biwak Feature #466 (Erledigt): avoiding HAL_RCC_OscConfig does not work
-
11:51 Biwak Feature #466 (Gelöst): avoiding HAL_RCC_OscConfig does not work
15.01.2024
Auch abrufbar als: Atom