Software

21.01.2025

16:04 CANSwitch Feature #498 (Abgewiesen): Write testing framework based on events for host PC

Testing software on PC directly is much nicer.
Maximilian Seesslen

15:54 CANSwitch Test #487 (Erledigt): Fading working

Maximilian Seesslen

15:53 CANSwitch Feature #562 (Erledigt): Binary size to big

Works well at the moment. Maximilian Seesslen

15:51 CANSwitch Fehler #602 (Erledigt): Media is not switched off

Is the fader active, so with delay of 20 Seconds?
Maximilian Seesslen

15:50 CANSwitch Test #485 (Erledigt): Timeout

Maximilian Seesslen

17.01.2025

13:29 Cordyceps Feature #599 (Erledigt): Sort nodes in node view

The objects of nodes are already sorted.
When the nodes are also sorted, the nodes will always be at the same positi... Maximilian Seesslen

16.01.2025

18:44 Campo Feature #598 (Erledigt): CS2025.01

Maximilian Seesslen

18:26 Kokon Feature #597 (In Bearbeitung): Support second bootloader for flashing first bootloader

Maximilian Seesslen

18:16 Kokon Feature #597 (Erledigt): Support second bootloader for flashing first bootloader

Would be nice to be able to flash bootloader. For this a second bootloader has to be flashed at the application area.... Maximilian Seesslen

17:56 Biwak Fehler #596 (Abgewiesen): Device freezes on high CAN traffic

When flashing (other) device, mainswitch freezes.
Sending an error is problematic.
Send error only on error-transit... Maximilian Seesslen

15.01.2025

15:12 Kokon Feature #595 (Neu): Check board id and revision before flashing

This can be checked in flasher tool or on the devcice.
Where to keept the information for firmware files.
Database ... Maximilian Seesslen

11:05 Cordyceps Fehler #592 (Erledigt): Dont show MMP messages in nodes tree

Maximilian Seesslen

13.01.2025

15:38 libcampo Feature #593 (Neu): hwdata: clean up

Clean up the code a bit.
An seperate application should be created for dumping, generating eeprom content, transfe... Maximilian Seesslen

14:33 Cordyceps Fehler #592 (Erledigt): Dont show MMP messages in nodes tree

Its interpreted as regular TDT object. Maximilian Seesslen

12.01.2025

16:26 libcampo Feature #588 (Erledigt): hwDataGen

Maximilian Seesslen

09.01.2025

16:06 theme_noto Feature #566: create const icon references

Looks like there is something implemented. But documentation about generated header is completely missing.
Maximilian Seesslen

08.01.2025

11:20 Biwak Fehler #590 (Erledigt): lrElapsed does not work any more

Test is added.
Problem was in Mainswitch. After a Software-Shutdown the shutdown-message was spamed when power was... Maximilian Seesslen

07.01.2025

18:31 Biwak Feature #591 (Erledigt): move timing functions to systimer.cpp

Make it clean. "usleep()" is in no way related to CTimer. Maximilian Seesslen

16:28 Biwak Fehler #590: lrElapsed does not work any more

This can be a unit test for host.... Maximilian Seesslen

14:32 Biwak Fehler #590 (Erledigt): lrElapsed does not work any more

It waits for the first elapse event and then returns true forever.
Looks like timer-value is not updated.
Very ba... Maximilian Seesslen

15:09 Kokon Feature #585 (Erledigt): Implement scanning nodes and switching run mode

Maximilian Seesslen

14:27 Biwak Feature #470 (Erledigt): cmake function to select bootloader or application with bootloader

Maximilian Seesslen

14:13 Campo Feature #589 (Abgewiesen): Add script to find devices with obsolete firmware

Put logic for SQLite database to CANFlasher/kokon is bad.
Generate parsable version output to CANFlasher tool would ... Maximilian Seesslen

12:19 libcampo Feature #588 (Erledigt): hwDataGen

Create generator tool.
The scipts are nice but confusing.
Maximilian Seesslen

12:11 libcampo Feature #491 (Erledigt): Vagus: implement command to switch to bootloader

Maximilian Seesslen

12:10 libcampo Feature #457 (Erledigt): Track library release sizes

Maximilian Seesslen

12:01 Campo Feature #500 (Erledigt): reactivate qt integration

Maximilian Seesslen

11:59 Cordyceps Feature #520 (In Bearbeitung): Implement canserver/CAN-Gateway

Maximilian Seesslen

11:58 Cordyceps Feature #520 (Erledigt): Implement canserver/CAN-Gateway

CANHub is created, should be used by cordyceps. Maximilian Seesslen

05.01.2025

08:01 Biwak Revision 7d225b27 (libbiwak3): fixed building for host

Redmine Admin

07:49 Biwak Revision 78dd256b (libbiwak3): draft

Redmine Admin

07:37 Biwak Revision a8cf4469 (libbiwak3): fixed building for host

Redmine Admin

07:32 Biwak Revision 4e83100c (libbiwak3): fixed compiling for host

Redmine Admin

07:14 Biwak Revision 568ca0ca (libbiwak3): flash: optional 32bit write access

Redmine Admin

04.01.2025

22:38 Biwak Revision 87431d82 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel

Redmine Admin

22:34 Biwak Revision f20dea84 (libbiwak3): internal flash: draft for writing 32bit values

Redmine Admin

18:47 Biwak Revision 152495e8 (libbiwak3): fixed flashing option bytes

Redmine Admin

02.01.2025

19:23 Biwak Revision caf8b9a0 (libbiwak3): ADC: lit compile it for unspecified STM32

Redmine Admin

12:40 Biwak Revision 3f427f2f (libbiwak3): Fixed ADC for stm32g0

Redmine Admin

10:10 Biwak Revision 9ab921d8 (libbiwak3): stage for changing IS_ENABLED()

Redmine Admin

01.01.2025

21:59 Biwak Revision 49223a04 (libbiwak3): stage for changing IS_ENABLED()

Redmine Admin

20:51 Biwak Revision 31052c89 (libbiwak3): fixed compiling for host

Redmine Admin

20:14 Biwak Revision 310f0938 (libbiwak3): support bootloader != 16K

Redmine Admin

20:09 Biwak Revision 989a3694 (libbiwak3): draft

Redmine Admin

20:02 Biwak Revision d673b288 (libbiwak3): added biwakPrintDateInfo()

Redmine Admin

20:02 Biwak Revision 68b05f3e (libbiwak3): added biwakPrintDateInfo()

Redmine Admin

19:42 Biwak Revision 1a691b06 (libbiwak3): stage for changing IS_ENABLED()

Redmine Admin

19:39 Biwak Revision ba76c7d9 (libbiwak3): stage for changing IS_ENABLED()

Redmine Admin

19:31 Biwak Revision f248ae75 (libbiwak3): staged change of IS_ENABLED()

get rid of automatically adding CONFIG_ Redmine Admin

18:17 Biwak Revision e5fca9bd (libbiwak3): print log cathegory

Redmine Admin

17:52 Biwak Revision cb373e53 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel

Redmine Admin

17:48 Biwak Revision 8ae9a168 (libbiwak3): test: retain: check for not set BIWAK_I2C_RETAIN_ONLY

Redmine Admin

15:24 Biwak Revision 1a21721b (libbiwak3): updated log

Redmine Admin

01:54 Biwak Revision 4b493832 (libbiwak3): adc: dont assume channel to be unset when switching

Why should this be assumed? Mito does not boot. Redmine Admin

31.12.2024

16:14 Biwak Revision 2c034f72 (libbiwak3): updated changelog for v2.12.0

Redmine Admin

30.12.2024

21:01 Biwak Revision b1cc07d8 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel

Redmine Admin

21:01 Biwak Revision 48c342bf (libbiwak3): gpio: host: detect problems with ui implementation

Redmine Admin

20:46 Biwak Revision 58084c00 (libbiwak3): pseudo support for qspi and sd on host

Redmine Admin

29.12.2024

13:52 Biwak Revision 50efd1cf (libbiwak3): dac line dma: added getters to avoid guessing magic arena names

Redmine Admin

13:39 Biwak Revision 802ef672 (libbiwak3): tests: increased allowed jitter time to pass on build server

Redmine Admin

12:10 Biwak Revision 0a2ed239 (libbiwak3): enhanced fake implementation for host

Redmine Admin

28.12.2024

00:21 Biwak Revision 7c1c6c7f (libbiwak3): let canbridge compile for host

Redmine Admin

19:52 Biwak Revision f09cab4e (libbiwak3): adopted biwak changes

Redmine Admin

19:44 Biwak Revision 1a45c24c (libbiwak3): fixed compiler errors

Redmine Admin

19:25 Biwak Revision eb0168ef (libbiwak3): logCustomChannel(): use c++ abi

Redmine Admin

19:01 Biwak Revision 3aaa1304 (libbiwak3): log: uise logCustomChannel() instead of logCode()

logCode() is way to confusing Redmine Admin

18:32 Biwak Revision b7f7dade (libbiwak3): fixes for host tests

Redmine Admin

11:51 Biwak Revision 2a20effa (libbiwak3): uart: added functions to set it to stdout explicitly

This would avoid using virtual functions via CIOBase Redmine Admin

27.12.2024

17:42 Biwak Revision b54db20f (libbiwak3): avoid compiler warning

Redmine Admin

17:41 Biwak Revision 8887ae17 (libbiwak3): cmake: set USE_BIWAK to let other detect usage

Other submodules can check if library is involved and the link against
it.
This will automatically set an preprocesso... Redmine Admin

17:39 Biwak Revision 45e1f4af (libbiwak3): renamed ELogCode to ELogBlended

Avoid confusion, name it what it is. Redmine Admin

17:38 Biwak Revision dd15414b (libbiwak3): CAN: increased delay when mailboxes are not available

Redmine Admin

17:37 Biwak Revision d10ae721 (libbiwak3): added SCanMessage

Lepto does/may not contain a class for CAN messages any more. Redmine Admin

17:33 Biwak Revision 6d9ddb12 (libbiwak3): adopted renaming of lepto/noqt.h to liblepto/mockQt.hpp

Redmine Admin