Projekte
- Hardware
PCBs
- Awaria
Cut power supply for testing devices
- Bringup
Board helping testing other PCBs
-
- Cablemeter
Check resistance of CANBus cables.
- CANBridge
Wireless bridge for CAN bus.
- CANBridge2
Wifi module with CAN.
- CANBuz
Buzzer on CANBuz
- CANRec
Records can messages over long time.
- Evals
Evaluation boards
- INA228
Current/Voltage measurement
- Haara
Cut power of CAN areas.
- Helios
Combine mainswitch and canswitch.
- Magna
Test reference board
- mainSwitch
5V Power supply with power line isolation when off.
- Messor
Motion detector; Light measuring
-
- Miniminutnik
Egg timer.
- Minutnik eInk
Small minutnik with eInk display fo individual configuration.
- MNThermo
Thermometer for minutnik/CANDis
- NUC64DEBUG
Small adapter to flash own stm32 boards with the help of an Nucleo64.
- Ophio
USB-Uart adapter
- Rufa
Small Thermocouple-Sensor to CAN adapter.
- sensemux
Sensor decoder.
- Slonce
LED driver and accesoir
- Somet
Replace the Comet PCB with an STM32 Board.
- Splitter
Adapter-Board fuer direkte Stichleitungen auf dem CAN-Bus
- Takki
Some capazitive touch buttons for controlling ambient light.
- USB panel
Connect my devices to charge them.
- Software
Applications
-
- Biwak
Microcontroller Peripheral Abstracktion C++ Library
- Cordyceps
PC tool to analyze campo devices.
- Kokon
STM32 Custom-Bootloader
- libbringup
Verificate handmade PCBs
- libcampo
Helper tools for campo projects.
Headers vor EEPROM Layouts. - libHALWrapper
Wrapper library for STMs HAL library
- liblepto
Small general purpose C++ library for microcontrollers like STM32 with flash sizes down to 16 KByte.
- libocelli
Graphics widget library for biwak.
- libpharao
Shrink binary size of bare metal applications.
- libscapus
Additional sensors for arena.
- libtdt
Protocol layer for CAN
- LibtritoSuccessor/Cleaner version of libvagus.
Implement things that most devices which are using libtdt/arena have in common.- Handle hardware data in eeprom
- Handle configuration in eeprom
- Support setting device node via TDT
- Sending log codes via CAN...
- sthello
Simple test application for biwak and lepto. Prints "Hello World" and lets an LED blink.
- theme_noto
Icons for CANDis
- campoTemplate
Template for campo application.
- Canbridge
Transmit CAN messages wireless between CAN sections
- CANDis
Controller panel;
http://www.minutnik.de/campo/sw/candis/ - CANHub
CAN via TCP
- CANMon-Qt
Qt application showing CAN traffic
- CANRec
Store sensor data from CAN on SD card.
- CANSwitch
Switch power lines via CAN bus.
- fosh
Simple shell for campo projects.
- gitversion
CMake module fore verison info header generation
- horo
Solder controller
- Mainswitch
5V power supply
- miniminutnik
Small egg timer
- Minutnik Candis
Egg timer with graphical touch display.
- Mito
Cablemeter
- MWidgets
Some fancy Qt widgets. Plotters etc.
- PhonyBL
Simulate an ROM Bootloader of an STM32 device in order to flash SPI-Flash connected to an STM32.
- Ritning
Python helper library for creating SVG graphics for lasering acryl housing and to script KiCad footprints.
- Rufa
Thermocouple to CAN adapter
- Stoker
Build script for building all campo projects in a single run.
- TCB
Toolchain builder
- TDTPrompt
Simple GUI showing specific sensor values.
- VoDI
Small tool for calculation of electronical parts
-
Auch abrufbar als: Atom